Piney Point Vessel Familiarization Practice Test

These questions are part of the practice quiz. Start practicing

• What is Breadth?
• Which knot is used to join two lines of equal size?
• Who conducts inspections to verify vessel compliance with international shipping regulations?
• Which item should be documented after a near-miss incident to support safety records?
• Who shall conduct sufficient drills and give sufficient training and instruction to ensure the crew is familiar with their emergency duties and responses?
• What is the very front end of the ship called?
• What are the primary VHF channels used for distress, hailing, and inter-ship communications?
• What is the series of vertical plating welded perpendicular (90 degrees) to the center girder (keelson) called?
• How many weeks is Phase 1?
• What measurements can a multimeter be used for?
• In the unlicensed apprentice program, how many phases does the Steward pathway have?
• Which term describes the vertical partition that divides the interior into compartments?
• In the unlicensed apprentice program, how many phases does the Engine pathway have?
• How should the kill switch lanyard be secured during operation?
• Which statement correctly defines a knot?
• What is the vertical partition that separates the interior of a ship into compartments or rooms?
• Which knot would you use to tie a line to a railing?
• What information are you looking for on this first item?
• After deploying an anchor, how can you verify that it is holding?
• What should be covered about personal flotation devices during the safety briefing?
• Bulk carriers are designed to carry what kind of cargo?
• In the event of a near-miss, what is the recommended approach to improve safety?
• What is the proper sequence for a basic onboard safety briefing for passengers?
• What action should you take immediately if you suspect a fuel spill during fueling?
• When responding to a spill, who should be notified?
• Describe the characteristics of the abandon ship alarm.
• When an officer of the watch gives you an order on the helm, what three actions should you perform?
• Which item should be included in a Mayday call on VHF Channel 16 to signal for help?
• Which mechanisms does a purifier use to separate contaminants and water from oil?
• What colors are the starboard and port navigation lights?
• Which knot is better than an overhand because it is bigger and will not jam?
• Who is tasked with inspecting vessels, both foreign and domestic to a particular maritime nation, verifying that the condition of the ship and its equipment comply with the regulations of the IMO?
• Which component runs athwartship and supports a deck?
• What is the term for the right side of a vessel?
• Name a natural fiber line.
• Which PPE items are required for needle gun task?
• Which term describes the vertical distance from the waterline to the bottom of the hull?
• What is the primary function of a purifier on a ship?
• After stopping due to abnormal engine noises or vibration, what should you do before resuming operation?
• During a sudden weather change while underway, what is a recommended initial action?
• Which of the following is the strongest type of line?
• How would a bulkhead run if it ran from one side of the vessel to the other?
• Which rating is responsible for running and maintaining pumps used in liquid cargo transfer and related deck machinery?
• Why is it important to know the overall length of the vessel you work aboard?
• The back end of a vessel is known as what?
• Which channel is used for general calling in some regions on VHF?
• How should you respond to a spill of oil or fuel in the water near a vessel?
• How many types of framing are there?
• In mooring, which line controls the stern position?
• In the unlicensed apprentice program, how many phases does the Deck pathway have?
• You have been tasked with climbing the mast in order to replace a mast light 15 feet above the deck. What is the term to describe that you are above the deck?
• During a muster drill, which objective besides headcount is typically emphasized?
• Which fire extinguisher type is most appropriate for electrical or equipment fires on a small vessel?
• Which actions should you take when approaching a dock in busy or restricted waters?
• Which group is considered Operational Officers?
• Which action helps mitigate a fuel leak hazard after stopping fueling?
• What is the safe procedure to start and stop a typical outboard engine?
• ________ Is the very middle point of a vessel.
• What is the purpose of spring lines in mooring?
• How many boilers do ships have?
• What type of cargo do tanker ships carry?
• Which color is the stern light?
• What contractual agreement will you sign when meeting with the ship's Master?
• Who is responsible for the safety onboard the ship?
• Which knot is commonly used to tie a line to a post?
• What is the initial action you should take if an injury occurs on board during a trip?
• What is the term for ANY equipment that is on the seaward side of the vessel?
• Which of the following is one of the required documents you should have when reporting to the ship?
• What program ensures there is a pool of civilian owned merchant ships on retainer and available to transport military hardware and weapons to a theater of war when needed?
• What are a vessels walls called?
• What is the recommended approach when there is a language barrier on board?
• Which of the following are common signs of hazards in shallow water for a vessel?
• Which sequence describes the proper response to a helm order?
• Who is the officer in charge of the Engine Department?
• Which option best explains why sea transport remains essential for many goods?
• The port and starboard sides meet at the bow at a location known as what?
• Which abandon ship alarm pattern is correct?
• Which statement about the becket bend is true?
• Which steps verify that safety equipment is in date and operable before a trip?
• Which action is essential during a basic shelter-in-place drill?
• What is an athwartship horizontal structure member used to support a deck?
• Which of the following is a valid location for the Station Bill?
• What color is the stern light?
• Which knot is commonly used to tie off to a cleat?
• What is a knot?
• Which position is in charge of engine room operations?
• During docking, what is a primary practice to maintain look-out and situational awareness?
• Which color is displayed by the starboard navigation light?
• Which synthetic line will float?
• What type of vessel is designed to carry loose cargo, or non-packed dry goods, such as iron ore, grains, phosphates, and bauxite?
• Which color is displayed by the port navigation light?
• How should you communicate a change in plans to the crew and dock staff?
• What is the mandatory credential that all credentialed merchant mariner workers are required to have in order to gain unescorted access to secure areas of ports, vessels, and outer continental shelf facilities?
• Which measure helps keep the vessel within safe speed in a crowded harbor?
• Name the six documents you should have with you when reporting to the ship and meeting with the master?
• In which scenarios is wearing a work vest on a ship specifically required?
• That contractual agreement will indicate the type of route the ship runs. Which of the following pairs are the two route types?
• What is the bight?
• Which of the following is a synthetic line?
• What does the Merchant Marine Act (the Jones Act) require when it comes to shipping in the U.S.?
• Which statement accurately reflects the requirement for markings identifying safety equipment?
• List all PPE you should be wearing while using a needle gun to chip loose paint off a rusted spot of a bulkhead?
• What is the left side of a vessel called?
• Which steps constitute a safe refueling procedure to minimize spills and vapors?
• What is the role of a dedicated spotter during close-quarters maneuvers?
• Which officer serves as the Navigation Officer?
• Which task is part of a wiper's main duties aboard a vessel?
• Which officer is typically introduced after meeting the department head and is responsible for the ship's command?
• What is the watertight body of a vessel that floats on the water called?
• LOTO stands for what?
• A hole or slot in a frame or plate for the purpose of preventing water from collecting is known as what?
• A post-operation debrief should include which element?
• What is the difference between a bow line, stern line, and spring line in mooring?
• Which action helps prevent slips, trips, and falls on deck?
• What is one PPE item you definitely need in order to climb up the mast to change a mast light?
• Why is it important for the navigator to know the draft of the vessel they work aboard?
• Which knot forms a secure loop that won't slip around an object?
• If you hear abnormal engine noises or feel unusual vibration, what is the correct first action?
• Which knot forms a temporary loop in the end that will not slip?
• How should oily absorbents and hazardous waste be disposed of legally and safely?
• The stern light color is used to indicate the vessel's rear orientation; what color is it?
• Who is the junior-most Deck Officer?
• Which device removes contaminants and water from fuel oil and lubricating oil?
• During docking, which practice helps maintain look-out and situational awareness?
• What term describes the outer shell of a ship that provides buoyancy and keeps water out?
• Which fittings are used to secure lines on deck and on the dock?
• Which chart-reading skills are essential for safe local navigation?
• Which term is another name for the width of a ship measured from port to starboard?
• Which term describes the vertical series welded at 90 degrees to a center girder to form interior divisions?
• What allows personnel to move from one compartment to another on a ship?
• Which three parts should never be painted on a watertight door?
• When given a helm order, which practice should you follow to ensure the instruction is carried out?
• In the unlicensed apprentice program, how many phases does the Steward pathway have?
• What are the functions of the bilge pump and bilge alarm on a small vessel?
• How should you test and operate the vessel's steering and throttle controls before departure?
• Which of the following best describes the primary purpose of a windlass?
• Which of the following is a natural fiber line?
• Identify the times you would be required to wear hearing protection.
• What is the required gap in days between QMED classes before taking another set?
• If a bulkhead runs from the port side to the starboard side of a vessel, what term describes this orientation?
• What is the primary purpose of the emergency diesel generator on a ship?
• What is the purpose of a kill switch lanyard and how should it be used?
• Which of the following is part of basic environmental precautions before closing up the vessel and leaving shore?
• What are potential effects of improper loading on a vessel's stability?
• Which item is included in a basic vessel safety kit?
• It's your time off and you decide to go outside the house to have a smoke or get some fresh air before going to bed. Is it okay to wear open toed shoes while outside?
• After signing the contractual agreement and receiving your number or rating title, what should be the first item you need to look for?
• What are the basic distress signals for land and water?
• After meeting with your department head first, they will introduce you to who?
• What are the vertically positioned voids placed between cargo holds known as?
• Which statement about anchor windlasses is true?
• A hammer fell from aloft and hit your hard hat. The hard hat did its job and protected your head. You examine the hard hat and see no visible damage. What should you do now?
• What is the nautical term for being above the deck during maintenance on the mast?
• Which pair of colors correctly represents the starboard and port lights together?
• What combination of fire extinguisher types and uses is commonly found on small vessels?
• How should you verify the navigation lights are functioning at night?
• How many types of anchor windlasses are there and what are they?
• Which location is explicitly listed as a possible place to find the Station Bill?
• Which statement about the becket bend is true?
• Which item in a basic safety kit is used for signaling in an emergency?
• What is the purpose of a float plan and what information should it contain?
• Why is it important to avoid ignition sources when you detect a fuel odor?
• Which of the following practices are recommended to prevent pollution during Piney Point operations?
• What is the purpose of basic load distribution and how can improper loading affect stability?
• Which statement best describes the true scope of the Jones Act regarding U.S. maritime commerce?
• What are essential pre-departure checks you should perform on engine, steering, and safety systems?
• Why is the use of ships to transport goods around the globe still the primary means of transporting goods?
• What is the correct procedure for reporting a near-miss incident on Piney Point operations?
• What is the primary purpose of a personal flotation device (PFD), and when is it required on board?
• What is the first action to take when you detect a fuel leak or strong fuel odor on board?
• What are key steps in an emergency plan?
• If visibility becomes poor while underway, what steps should you take?
• Which program maintains a pool of civilian-owned merchant ships on retainer to transport military hardware and weapons to a theater of war, and approximately how many contracted vessels are included?
• Where can the first item you need to look for be found?
• What is the first action in a basic MOB (man overboard) response?
• Which of the following is a synthetic line?
• Your vessel is at ANCHOR when you go to report onboard. What piece of equipment would be available to allow you to come on board?
• Which color is associated with the starboard side navigation light?
• Which of the following is a synthetic line?
• Why have container ships become one of the leading modes of shipping goods throughout the world?
• What is the purpose of a deck log or vessel operations log?
• Which item provides proof of identity and qualifications among the six documents?
• You open a hatch in order to access the space below and need to leave it open. What should you do?
• When reporting onboard at anchor, which equipment would be used to come aboard?
• A wiper primarily supports which crew members in the engine department?
• What is the proper sequence to deploy and recover an anchor on a small boat?
• During refueling, why should you stop just short of overflow and ventilate the area?
• Explain the IALA buoyage system in simple terms and what red and green marks indicate.
• What is a primary reason to maintain proper ballast and weight distribution?
• Name all of the reasons when wearing a work vest on ship is required.
• Why is it important to maintain three points of contact when boarding from a dock?
• What specialized agency of the United Nations is responsible for measures meant to improve the safety and security of international shipping and oversee shipping regulations throughout the world?
• Which safety device should be tested during pre-departure checks besides fuel and oil?
• The electric grinder you grab out of the tool locker has a tiny spot where there is a wear and tear showing an exposed wire. What should you do?
• Which of the following are the four valve categories?
• Which actions constitute a proper post-operation review to identify lessons learned?
• Which statement correctly defines port and starboard and orientation when facing the bow?
• If you are asked to identify the color of the port light, you would answer?
• If a tool shows wear on its cord and there is exposed wire, what should you do?
• Before departure, which aspect should you verify about the vessel's electrical system?
• What are padeyes used for?
• What should all ships worldwide have posted to identify safety equipment, emergency equipment, and escape routes regardless of language?
• Which type of line is the strongest?
• What is the purpose of a muster point on a vessel?
• During a basic safety briefing, which item is designated as muster points?
• According to the U.S. Department of Defense, what percentage of total U.S. freight travels on the western rivers of the U.S.?
• During a basic engine compartment fire safety assessment, which practice directly contributes to safe emergency egress?
• Explain the importance of conducting drills.
• If you are asked to identify the color of the starboard light, you would answer?
• Who should you notify after muster and accountability in an emergency plan?